-
Products
- Air to water heat pump effiQueenc
- Boiler maintenance parts
- Circulator pump and flange
- Hardware, fitting, ball valve and tools
- Heat exchanger
- Heating and cooling unit
- Hot water boiler
- Hydronic separator and air eliminator
- Manifold and Actuator
- Pex pipe and pre-insulated piping
- Pressurization and tank
- Thermostat and control
- Promotions
- About us
- TJ Solutions Hydronique - Homepage>
- Catalog>
- Circulator pump and flange>
- Circulator pump>
- Grundfos circulator pump UPS 15-58FC
Grundfos circulator pump UPS 15-58FC
Product Code: TJ-UPS1558FC
GRUNDFOS CIRCULATOR PUMP UPS 15-58FC
The Grundfos UPS 15-58FC is a 3-speed cast iron circulator pump with built-in flow check. 3 speeds (Low/Med/High) of the Grundfos UPS 15-58FC make this model very versatile and allow to use it in a large variety of heating applications inlcuding radiant, hydronic, radiators, fan coils, etc. A built-in flow check eliminates the need to buy and install a separate in-line check valve. This circulator is designed for closed loop systems with medium to high flow rates and pressure drops. A built-in automatic resetting thermal protection of the pump assures motor safety and extends circulator's life.
Number 59896341
Features:
- Heating in commercial and tertiary buildings
- Built-in motor protection for longer life and better performance.
- Suitable for a wide range of applications, including radiant heating, hydronic heating, fan coil heating, solar and other system types.
- Whisper-quiet operation for sound sensitive installations.
- Includes (2) Gaskets (O-rings) and check valve .
- UL/CSA listed.
Applications:
- Closed loop radiant heating & snow melting systems.
- Baseboard, Radiator, Fan coil heating and other hydronic heating and cooling applications
Model Number | UPS 15-58FC |
Pump Housing | Cast Iron |
Number of speed | 3 |
Type motor | 2 Poles |
RPM | 2450 |
Power consumption Speed (1) | 60 W |
Power consumption Speed (2) | 80 W |
Power consumption Speed (3) | 87 W |
Amperage Speed (1) | 0.55 A |
Amperage Speed (2) | 0.66 A |
Amperage Speed (3) | 0.75 A |
Voltage | 115v |
Hertz | 60 Hz |
Phase | 1 |
Connection Port | Flange 2 holes Standard GF15/26 |
Power HP | 1/25 HP |
Max. Flow | 18 GPM |
Max. Head/Feet | 19 Ft |
Working Temperature (liquid) | 36°F (2°C) ~ 230°F (110°C ) |
Max. Pressure | 145 PSI |
Certification | CSA, UL |
Performance Curve
Installation and operation manual
- Availability: In stock
(418) 397-0114